This is a widespread problem. The Spin not working in washing machine leaves the dirty clothes soaking wet. In many Indian homes where laundry needs to be done in bulk and power cuts are frequent, a washing machine not spinning is one of the most common complaints.
Don’t worry — reasons why your washer won’t spin will be given in this guide, and simple troubleshooting steps that you can do before calling a professional.
Why the Spin not working in washing machine – Common Reasons
A washing machine can stand still in the spin cycle for an endless range of reasons — everything from a blocked drain hose to a drum full of garments. Here are the most common reasons:
#1. Unbalanced or Overloaded Laundry Load
- If the washer is too full, the drum becomes unbalanced.
- The washing machine sometimes refuses to spin when heavy items (like bedsheets) are stuck on one side.
Fix: Remove some clothes, adjust the load size, and try again.
#2. Drainage Problems
- A kinked drain hose or a blocked drain pump can prevent the washer from draining water.
- If water stays inside, the washer won’t spin.
Fix: Straighten the drain hose and clean the pump filter.
#3. Lid Switch or Door Lock Issues
- In top-load machines, a broken or stuck spin switch or faulty lid sensor stops the spin cycle.
- In front-loaders, an unlocked door can prevent spinning.
Fix: Make sure the lid is closed properly, or check if the lid switch needs replacement.
4. Damaged Drive Belt or Bearings
- A broken drive belt or damaged drum bearings can stop the washer drum from spinning.
- This often causes excessive vibration or unusual noises.
Fix: Inspect the drive belt and bearings. If damaged, call a technician.
5. Power & Reset Issues
- After frequent power cuts in India, some machines get stuck mid-cycle.
Fix: Unplug the washer for 5 minutes, then restart. Many LG and Samsung washing machine spin problems are fixed this way.
Quick Troubleshooting Table
| Power cut/reset needed | Possible Cause | The washing machine won’t spin or drain |
|---|---|---|
| Washer not spinning | Overloaded drum | Reduce load & balance clothes |
| Drum not spinning | Broken drive belt | Replace belt (technician needed) |
| The washer refuses to spin | Blocked drain pump/hose | Clean filter & unclog drain |
| The washing machine stopped spinning | Lid switch faulty | Replace lid switch |
| Power cut/reset needed | Power cut / reset needed | Unplug & restart |
Also Read: How to Reset LG Washing Machine – Instantly Fix Common Issues in Minutes
Brand-Specific Spin Issues in India
- LG Washing Machine Spin Not Working – Often due to an unbalanced load or a reset needed.
- Samsung Washing Machine Not Spinning – Commonly linked to drainage hose blockages.
- IFB Washing Machine Not Spinning – Sometimes caused by door lock sensor issues.
- Whirlpool Washing Machine Won’t Spin – Frequently due to drive belt or lid switch problems.
- Bosch Washing Machine Problems – Users often report the tub not spinning or the machine not starting.
Tip: Always check your washing machine manual or brand’s official support page for exact fixes.
Pro Tips to Prevent Spin Cycle Issues
- Avoid overloading the washer — better to run two small loads than one big one.
- Regularly clean the pump filter to prevent clogs.
- Keep the washing machine level to reduce vibration.
- Use a stabilizer in areas with frequent voltage fluctuations.
- Call a professional if you hear grinding noises (could be bearings).
Also Read: How to Drain Water from Automatic Washing Machine: Expert Tips to Fix or Avoid Damage
FAQs
Why are my clothes still wet after spinning?
If your clothes are wet when the spinning stops, it pretty much means that the washing machine drum is not spinning properly. It could be, the load isn’t balanced, the drain hose is clogged, or the drive belt is defective. Indian households, where heavy laundry like washing bedsheets is common, consider overloading the major reason. Always check for load balance before restarting the spin cycle.
How to reset a washing machine?
Resetting a contemporary washer in India is as simple as unplugging it for somewhere between five to ten minutes. This, however, only seems to work temporarily during occasional power cuts or voltage fluctuations. In addition, certain machines might have that reset button on the control panel; hence, refer to your manual for details.
How do you reset a washer that won’t spin?
3. How do you reset a washer that won’t spin?
In case the washer won’t spin, you first need to unplug it for a couple of minutes before plugging it back in. With this, the control board resets. Then check to see that there is not too much laundry on it for an unbalanced load to occur, and ensure the lid switch or door lock is working fine. If that does not work, a technician might have to see the “motor or drive belt.
What is the lifespan of a washing machine?
On average, a washing machine lasts 8–12 years in an Indian household. But that depends upon usage, maintenance, and power conditions. Overloading, hard water deposits, and voltage fluctuations would reduce its life if they happened frequently. Regular servicing, descaling, and stabilizer use will maintain your washer’s performance for longer.
Can a clogged drain cause a washer to not spin?
Yes, the clogging or partial blocking of the drain hose or pump filter happens to be the most common reason for a washer refusing to spin. If water cannot get away from the tub, then the spin cycle never comes about. In India, the drain pipe is often blocked with lint, coins, or detergent residues, so this cleaning helps prevent spin problems.
Also Read: How to Fix Washing Machine Tap: Simple DIY That Saves You from Costly Repairs
Final Thoughts
So all in all, the spin not working in washing machine problem is generally just a trivial imbalance in the load or a blocked or clogged drain hose. Most of these issues can potentially be resolved with just a little troubleshooting at home. But if your washing machine drum is not spinning even after trying these steps, it is better to call a technician to avoid further damage.
